Processor And Chipset Overview; Special Features; Recovery From Ac Power Loss - Supermicro X11SSD-F User Manual

1.2 Processor and Chipset Overview

Built upon the functionality and capability of the Intel® E3-1200 v5 series processors
(Socket LGA 1151) and the Intel C236 PCH, the X11SSD-F motherboard offers maximum
I/O expendability, energy efficiency, and data reliability in a 14-nm process architecture, and
is optimized for embedded storage solutions, networking applications, or cloud-computing
platforms.
The Intel E3-1200 v5 and PCH C236 platform supports the following features:
•
ACPI Power Management Logic Support, Rev. 4.0a
•
Intel Turbo Boost Technology 2.0 Power Monitoring/Power Control, Turbo Time Parameter
(TAU), and Platform Power Control
•
Configurable TDP (cTDP) and Lower-Power Mode
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0 w/transfer rates of up to 6 Gb/s, xHCI USB w/SuperSpeed 3.0
•
System Management Bus (SMBus) Specification, Version 2.0
•
Integrated Sensor Hub (ISH)The BMC supports remote management, virtualization, and
the security package for enterprise platforms
•
Intel Trusted Execution Technology (Intel TXT)
•
Intel Rapid Storage Technology
•
Intel Virtualization Technology for Directed I/O (Intel VT-d)

1.3 Special Features

This section describes the health monitoring features of the X11SSD-F motherboard. The
motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.

Recovery from AC Power Loss

The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
17
Chapter 1: Introduction