Supermicro X11SSD-F User Manual page 3

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X11SSD-F motherboard.
About This Motherboard
The Supermicro X11SSD-F motherboard supports an Intel® Xeon E3-1200 v5, 6th-Gen
Core i3, Celeron, or Pentium processor in an LGA 1151 (H4) socket. With the Intel® C236
chipset built in, the X11SSD-F motherboard offers exceptional performance for Supermicro's
line of MicroCloud nodes. The motherboard offers features such as DDR4 VLP memory
support, SATA 3.0, a KVM connector, a MicroLP PCI-E 3.0 X8 port, and a Trusted Platform
Module (TPM). These features enable the X11SSD-F motherboard to deliver a cost-effective
MicroCloud solution in a small form-factor package. Please note that this motherboard is
intended to be installed and serviced by professional technicians only. For processor/memory
updates, please refer to our website at http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered when performing a procedure.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
Preface
3
Preface