Dimm Installation; Dimm Removal - Supermicro X11SSD-F User Manual

X11SSD-F User's Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
JTPM1
Release Tabs
Press both notches
straight down into
the memory slot.
30
A
C
C
A UID
KVM
SW1
JIPMB1
JSTBY1
IPMI_LAN
JSMB1
USB2(3.0)
JPB1
C
A
LED3
JBT1
J4
Intel
C236 JSD1
JVR1
SATA DOM POWER
I-SATA2 I-SATA3
BT1 SATA DOM+POWER
X11SSD-F
REV:1.00
DESIGNED IN USA
CPU Socket
LGA1151
J5
FAN1
S-SGPIO1
Notches