Supermicro X11SSD-F User Manual page 43

BMC Enabled
JPB1 allows you to enable or disable the BMC (Baseboard Management Control) chip and
the onboard IPMI connection for debugging purpose only. This jumper is used together with
the IPMI settings in the BIOS. After the BMC is disabled, IPMI health monitoring and remote
management functions are no longer supported.
Storage Type Configuration
Use jumper J5 to configure the storage type for this motherboard. Jumping pins 1-2 will
allow the backplane HDD to use the SATA interface. Pins 2-3 is for the SAS interface. The
system should be equipped with an LSI AOC, and the cable is connected from the AOC to
SAS0 and SAS1.
C
A
UID
KVM
JIPMB1 SW1
JSTBY1
IPMI_LAN
1
JSMB1
USB2(3.0)
JPB1
C
A
LED3
JBT1
J4
Intel
C236 JSD1
JVR1
SATA DOM POWER
I-SATA2 I-SATA3
JTPM1
BT1 SATA DOM+POWER
X11SSD-F
REV:1.00
DESIGNED IN USA
CPU Socket
LGA1151
FAN1
S-SGPIO1
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
Storage Type
Jumper Settings
Jumper Setting Definition
BP HDD with SATA
Pins 1-2
Interface (Default)
LSI AOC to SAS0/
Pins 2-3
SAS1
A
C
1. BMC Enable
2. Storage Type Configuration
2
J5
43
Chapter 2: Installation