Quick Reference Table - Supermicro X11SSD-F User Manual

X11SSD-F User's Manual

Quick Reference Table

Jumper Description
JBR1 BIOS Recovery
JBT1 CMOS Clear
JI C1/JI C2 SMB to PCI-E Slots Enable/Disable
2 2
JPG1 VGA Enable/Disable
JPME2 ME Manufacturing Mode
JVRM1 VRM SMB Clock (to BMC or PCH)
JVRM2 VRM SMB Data (to BMC or PCH)
JWD1 Watch Dog
J5 Storage Type Configuration
LED Description
LED1 Unit ID LED
LED2 Overheat/PWR Fail/Fan Fail LED
LED3 BMC Heartbeat LED
Connector Description
BT1 Onboard Battery
FAN1 System Fan Header (Reserved)
I-SATA2, I-SATA3 Intel® PCH SATA 3.0 Ports (I-SATA2 with SATA DOM Power)
IPMI_LAN Dedicated IPMI LAN Port
J4 SGPIO Decoder Firmware update
JIPMB1 System Management Bus Header for the IPMI Slot
JSD1 SATA DOM Power Connector
JSMB1 PCH SMBus Header
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JVR1 SMB Programming Header (for debugging only)
KVM Keyboard/Video/Mouse Connector
MICRO LP CPU1 MICRO LP PCI-E 3.0 X8 Slot
SAS0 For SAS AOC (Add-on Card) use
SAS1 For SAS AOC (Add-on Card) use
S-SGPIO1 Serial Link General Purpose I/O Header
SLOT1 CPU1 SLOT1 PCI-E 3.0 X8 Slot
SW1 Power Button
UID Unit ID Button
USB2 Internal USB 3.0 Connector (Reserved)
Note: Table is continued on the next page.
Default Setting
Pins 1-2 (Normal)
Open (Normal)
Both Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (BMC, Normal)
Pins 1-2 (Reset)
Pins 1-2 (BP HDD with SATA Interface) (Default)
Pins 2-3 (LSI AOC connected to SAS0/SAS1)
Status
Blue Solid On: Unit Identified
Solid Red: Overheat, Blinking: PWR Fail/Fan Fail
Green Blinking: BMC Normal
12