Swegon ILTO X100 Premium Instructions For Installation, Use And Maintenance Manual page 48

One-week timer:
A standard function in the control panel is weekly programming of
the ventilation unit according to four different programs. The week
timer can be disabled in the Installation and service menu.
Programming:
1. Select program, for example ¼
2. Select Revise
3. Select the weekday by pressing the up/down buttons
4. Set the start time
5. Set the end time
6. Set the required air supply temperature (electric reheating)
Example
Operation: From Monday to Friday, during the period 8 AM – 4
PM, the unit operates with the fans running at the At Home speed
and a supply air temperature of 17 °C. If the Summer Night Cool-
ing function is used, the programmed temperature is ignored.
Unit model:
The unit model is displayed when the function is selected.
SELECTION MENU (The factory settings are shown in bold
type)
The functions below are shown as basic settings in the selection
menu.
MAIN MENU
Language ...................................................................Page 49
Installation and service ...............................................Page 49
Reheating ..................................................................Page 49
Clock .........................................................................Page 49
Summer night cooling ................................................Page 49
Temperature ...............................................................Page 49
Base display ...............................................................Page 49
Switch off ..................................................................Page 49
Fireplace function .......................................................Page 49
Weekly timer ..............................................................Page 49
Unit model .................................................................Page 49
Installation and service
Open the menu with code 1234 and confirm by pressing the Set
button.
To reset the unit to the factory settings
Resets the parameters to factory set values:
- Switch from the base display by pressing the Menu button to
advance to the Main menu
- Select Installation and service and enter the code
- Select Factory settings in the Installation and service menu
and press Select
- Press Return
- All the settings except those in the Fan speeds menu return to
the factory settings
48