Part 1: Fpga Development Board Introduction - Alinx ZYNQ7000 FPGA User Manual

Part 1: FPGA Development Board Introduction

The AX7350 FPGA development board is mainly composed of ZYNQ7350
main chip, 4 DDR3, 1 eMMC, 1 QSPI FLASH and some peripheral interfaces.
The ZYNQ7350 uses Xilinx's Zynq7000 series of chips, model number
XC7Z035-2FFG676. The ZYNQ7035 chip can be divided into Processor
System (PS) and Programmable Logic (PL). On the PS and PL sides of the
ZYNQ7350 chip, two DDR3s are mounted, each with a DDR3 capacity of up to
512 Mbytes. The ARM system and the FPGA system can independently
process and store data. The PS-side 8GB eMMC FLASH memory chip and
256Mb QSPI FLASH are used to statically store ZYNQ's operating system, file
system and user data.
The AX7350 FPGA development board expands its rich peripheral
interface, including one PCIex4 slot, two SFP interfaces, two Gigabit Ethernet
interfaces, four USB2.0 HOST interfaces, one HDMI output interface, and one
UART serial interface. 1 SD card interface, 1 FMC expansion interface and
some button LEDs.
Figure 1-1 is the Schematic diagram of the entire FPGA development
boards:
5 / 53
ZYNQ FPGA Development Board AX7350 User Manual
Amazon Store: https://www.amazon.com/alinx