Typical Installation Of Ice Storage Bin - Maxx Ice MIM452 Service, Installation, And Instruction Manual

Automatic commercial ice cube machine
Hide thumbs Also See for MIM452:
Table of Contents

Advertisement

Available languages

Available languages

Ice Maker Installation

TYPICAL INSTALLATION OF ICE STORAGE BIN

• Two connecting brackets are attached to the upper rear edge of the ice storage bin Turn the
brackets up (180°) and use two screws to connect the main machine and ice storage bin
• To ensure proper ventilation for your ice maker, you need keep the front of the unit completely
unobstructed
• Choose a well-ventilated area with temperatures above 50ºF (10ºC) and below 100ºF (38ºC) This
unit MUST be installed in an area protected from the elements, such as wind, rain, water spray or
drips
• The unit should not be located next to ovens, grills or other sources of high heat
• Installation of the ice maker requires a cold water supply inlet of 3/8"(9 5 mm) soft copper tubing
with a shut-off valve
• The ice maker requires a continuous water supply with a minimum pressure of 15 psig and a static
pressure not to exceed 80 psig The temperature of the water feeding into the ice maker should
be between 41ºF (5ºC) and 90ºF (32ºC) for proper operation
Normal operating ambient temperature should be between 50˚F
(10˚C) and 100˚F (38˚C). Normal operating water temperature should
be between 41˚F (5˚C) and 90˚F (32˚C). Operation of the ice maker for
extended periods outside of these normal temperature ranges may
affect production capacity
• In general, it is always a good idea to filter the water. A water filter, if it is of the proper type, can
remove taste and odors as well as particles
• The ice maker must be installed with all electrical and water connections in accordance with state
and local codes
• The ice maker and bin should be located on a firm and level surface. It is important for the ice
maker to be perfectly level for proper operation; otherwise water may not flow properly through
the evaporator (ice mold) Ice production will be less than expected and operation will be noisy
• The feet of most bins can be rotated to adjust the height if necessary Follow instructions
accompanying the bin you purchase
SERVICE AND INSTALLATION MANUAL
DANGER
WARNING
CAUTION
maxxfoodservice.com
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mim600Mim1000

Table of Contents