Water Supply; Installation Types - Maxx Ice MIM452 Service, Installation, And Instruction Manual

Automatic commercial ice cube machine
Hide thumbs Also See for MIM452:
Table of Contents

Advertisement

Available languages

Available languages

Ice Maker Installation

WATER SUPPLY

The water supply should be ready at the point of installation The water supply pressure should be a
minimum of 15 psig with a static pressure not more than 80 psig (A wall outlet directly behind the ice
IMPORTANT:
1 All installations must be in accordance with local plumbing code requirements
Professional installation is recommended
2. Water inlet fitting: 3/8" FPT (Female Pipe Thread); drain line connection: 1/2" FPT.
3 Make certain you have a suitable water supply hose and two suitable drain hoses, and that the
hoses are not pinched, kinked or damaged during installation
4 Check for leaks after connection
Tools required: 3/8" open-end wrench, Phillips screwdriver
Connecting the water line:
1 Turn off main water supply
2 Find a water supply line near the installation location The distance should be less than the length
of the water supply hose
3 A shut-off valve must be installed to the main water supply
4. Connect the water supply hose to tap and water inlet valve. Tighten firmly by hand, then one-half
turn with wrench
5. Connect the water drain hose to drain line connection. Tighten firmly by hand, then one-half turn
with wrench
6 Turn on main water supply and tap Check for water supply connection leaks Tighten every
connection (including connections at the water inlet)

INSTALLATION TYPES

This ice maker has only been designed for mobile (free-standing) installation There must be adequate
air space around the unit for ventilation purposes
Mobile installation:
An enclosed installation will allow you to install the ice cube machine under a counter or in a kitchen
cabinet provided the required clearance space around the ice maker is respected You must follow
the stated instructions for
a Electrical requirements
b Water supply
Cleaning before use
After you remove all tape from the machine, clean the inside of your ice maker and ice storage bin
before using them See "Interior Cleaning" in the Cleaning and Maintenance section
SERVICE AND INSTALLATION MANUAL
maxxfoodservice.com
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mim600Mim1000

Table of Contents