Table Of Contents - Viessmann Vitoligno 300-P Service Instructions For Contractors

Steps - commissioning, inspection and maintenance
For further information regarding the individual steps, see the page indicated
•
• • •
•
•
• •
•
•
•
•
•
•
•
• •
• •
•
•
• •
• •
• • •
•
•
Commissioning steps
Inspection steps
Maintenance steps
1. Fill heating system.........................................................
2. Checking all connections on the heating water side
for leaks
3. Switching the power ON................................................
4. Language selection........................................................ 10
5. Setting the time and date............................................... 11
6. Configuring the supply system..................................... 11
7. Commissioning the supply system.............................. 11
8. Setting delivery times for fuel supply........................... 12
9. Matching the control unit to the heating system ........ 12
10. Checking outputs (actuators) and sensors.................. 29
11. Adjusting the heating curves........................................ 31
12. Integrating a control unit into the LON......................... 34
13. Shutting down the system............................................. 36
14. Cleaning the combustion chamber............................... 37
15. Cleaning the secondary heating surfaces.................... 38
16. Cleaning the flue gas fan and the Lambda probe........ 39
17. Emptying the ash container (if required)...................... 40
18. Checking the diaphragm expansion vessel and
system pressure............................................................. 41
19. Checking the function of safety valves
20. Display "Maintenance"................................................... 42
21. Instructing the system user........................................... 43
Commissioning, inspection, maintenance
Page
6
6
5