Viessmann Vitoligno 300-P Service Instructions For Contractors page 126

Parts lists
Parts lists
Spare parts information
Quote the part and serial no. (see type
plate) and the item number of the
required part (as per this parts list).
Obtain standard parts from your local
supplier.
001 Flue gas fan (with pos. 002, 003
and 004)
002 Radial fan
003 Fan casing
004 Gasket, flue gas fan
006 Top inspection cover (with pos.
007, 008 and 009)
007 Folding handle
008 Pack 16 x 12
009 Thermal insulation block, two part
(with pos. 008)
010 Lambda probe
011 Insulation disc 38 x 8 M 18 x 1.5
012 Pivot head
013 Drive disc
014 Geared motor
015 Limit switch retainer
016 Microswitch
017 Thermal insulation block, door
insert
018 Combustion chamber door (with
pos. 008 and 019)
019 Insulating block, front
020 Draught plate
021 Round gasket
022 Round gasket
023 Combustion chamber, top firing
block (with pos.022 and 024)
024 Flat-packing, 2 pce.
025 Combustion chamber centre firing
block (with pos.023)
026 Combustion chamber lower firing
block (with pos.021)
027 Combustion chamber firing block
complete (with pos.022 to 026 and
065)
126
028 Burner grate with gasket
029 Pivoting lever, tilt lever shaft
030 Tilt lever shaft
031 Tilt lever set
032 Turbulator
033 Door contact switch, ash door
034 Tensioner, ash door
035 Ignition pipe
036 Electrical ignition element
037 Cover, ventilation air casing
038 Radiation plate, ash door
039 Claw handle
040 Ash door (with pos. 008, 038 and
039)
041 Ash door hinge
042 Motor panel
043 Limit switch retainer
044 Spacer sleeve, 4 pce.
045 Short universal joint
046 Protective panel
047 Motor, air damper casing
048 Retaining plate
049 Compression spring, 2 pce.
050 Air damper, 2 pce.
051 Lower profile, limit switch
052 Cast casing, air dampers (with pos.
053)
053 Pack 9 x 7
054 Air damper casing (with pos. 016
and 046 to 053)
056 Cover, ashbox, front
057 Cover, ashbox, back
058 Pack 10 x 10
059 Cover (with pos. 058)
060 Ash container, back
061 Ash container, front
062 Handle, ash box
063 Ash box
064 Ball bearing, 6 pce.
065 Top firing block insert
066 Tensioning strip, 2 pce.
068 Cable clamp
069 Locking lever