logitrans ROTATOR SELFR Manual page 17

3.0 How to operate the Rotator
3.6.4 Setting of stop position
From the factory, the forks are set to rotate continuously. When the forks have
rotated 360°, the machine stops rotating. If you want rotation to continue, it is
necessary to release/press the rotation switch on the remote control again.
It is possible to set up to three stop positions/angles for rotation in both directions.
If the machine is set with one or more stop positions/angles, the machine cannot
rotate further than the last set stop position/angle.
At the Stops menu, press on the first stop in the requested direction, and the
following is shown.
3.6.5 Deleting stop positions
At the Stops menu, press "CLEAR ALL" to delete all set stop positions/angles.
At home screen (HOME) press settings
(SETUP), and afterwards STOPS, and
the following is shown.
1. Use ➕/➖ to choose the size of the
angle or use "TEACH" to choose actual
position.
2. Use ✔/✖ to accept/cancel choice
and return to Stops menu.
3. At the Stops menu choose the next
stop position/angle and repeat the
procedure.
17