Page 1
Level control Supplement to Instruction Manual Logiflex ELF/ELFS SELF/SELFS...
Page 3
1.0 Optimum Safety... The operator must stand with a full view of the lifting and lowering movements of the equipment. Please note that reflections can cause unintentional activation! Clearances around the equipment must be checked before operating. No extraneous objects must be placed under the equipment.
Page 4
2.0 How operate the level control Logiflex ELF/ELFS The brake has to be activated before using the level control. Push ”Power ON”. The lifting equipment can start lifting/lowering. NOTE! Manual operating of the handle is not possible when the level control is active...
Page 5
2.0 How to operate the level control Upwards or downwards positioning can be chosen on the arrows (up/down). The red lamp is on, when the level control is active. To set the time delay, use ”Power ON”. To switch on the level control, press ”Power ON”, until the green lamp (A) (placed next to “Power ON”) is flashing.
3.0 Technical Specifications The range of the photocell is adjusted by a screw- driver (B). To achieve the maximum safety for the user, the photocell should be adjusted between 200 and 1200mm. The range of the photocell varies according to colour and surface of the material.