Advertisement
Quick Links
Advertisement
Related Manuals for logitrans Level Control LC4
Summary of Contents for logitrans Level Control LC4
- Page 1 Level Control LC4 ELF/ELFS_SELF/SELFS...
- Page 3 1.0 Optimum safety... The operator must stand with a full view of the lifting and lowering movements of the equipment. Clearances around the equipment must be checked before operating. No extraneous objects must be placed under the equipment. MAKE SURE that neither forks nor load snag extraneous objects during lifting and lowering.
- Page 4 2.0 How to operate the Level Control NOTE! ELF/ELFS The brake has to be activated before using the level control. NOTE! Manual operating of the handle is not possible when the level control is active.
- Page 5 2.0 How to operate the Level Control Push “Power ON” and the green lamp is on. The lifting equipment can start lifting/lowering. Upwards or downwards positioning can be chosen on the arrows (up/down). The red lamp (A) is flashing, when the level control is active.
- Page 6 2.0 How to operate the Level Control Programming of detection range and time delay before operation 1. Press “Power on”. The green lamp is on. The lifting equipment can start lifting/lowering automatically. 2. Use button (B) – choose the requested settings, detection range or time delay before operation (the lamp of the chosen setting lightens)..
- Page 7 2.0 How to operate the Level Control The height of the photo cell can be adjusted on the thumbscrew. Error codes Power consumption Main Power consumption: UP Power consumption: DOWN Power consumption: OUT (white) External brake In case of errors, the display and the red lamp will flash. Errors are deleted when the unit is turned off and switched on again.
- Page 8 S1082 Level control LC4 - EN 120619...