D.4
INSTALLATION PROCEDURE
Please read all the installation instructions prior to performing the install
to determine the correct steps for your configuration. Since the
MicroMMAC can be configured with 24 ports, 2 EPIMs and a BRIM,
some components may have to be removed in order to facilitate
installation of the Micro-CS.
Observe all antistatic precautions when handling electronic
!
components.
CAUTION
Item
Qty.
1
1
2
1
3
1
4
4
5
1
6
1
7
1
8
4
9
4
10
1
Micro-CS Installation Guide
Table 4-2 Micro-CS Upgrade Kit Contents
Description/Part No.
Micro-CS / 8910394
Wrist Strap / (part of 8910394)
Overlay Label / (part of 8910394)
1" Stand off (only 2 needed) / 8020076
6 inch cable / 9360171-6"
EPIM-3PS and manual
Micro-CS User's Guide (this manual) / 9031431
Screw, 6-32x5/16" (only 2 needed)
Washer, flat #6 (only 2 needed)
FCC Compliance Label
Installation Procedure
D-3