Cabletron Systems MicroMMAC 22ES Installation Manual page 57

The stats command display looks like this:
monitor:: stats
Ethernet Statistics
Frames Received:
CRC Errors:
Alignment Errors:
Resource Drops:
Bus Wait Drops:
Bad Types/Lengths:
Statistic
Frames Received
CRC Errors
Alignment Errors
Resource Drops
Bus Wait Drops
Bad Types/
Lengths
Frames Sent
Carrier Sense
Losses
Micro-CS Installation Guide
398 Frames Sent:
0 Carrier Sense
0 Clear to Send Losses:
0 Collisions Detected:
0 Excessive Collision Losses
0
Table 3-3 . Network Statistics
Description
The number of frames received.
The number of CRC checksum errors detected.
The number of frames received misaligned with a CRC
error.
The number of packets dropped because the ROM
code could not buffer them quickly enough. The ROM
code cannot always handle back-to-back incoming
packets. The Micro-CS accepts the first response it
receives and drops all others. Dropped packets are
normal.
The number of packets dropped due to waiting too
long for a bus to become available.
The number of unknown packet types if Ethernet IP
encapsulation is being used. The number of packets
with illegal lengths if IEEE 802.2/802.3 IP
encapsulation is being used.
The number of frames sent.
The number of times packets could not be transmitted
because the Micro-CS lost the Carrier Sense signal –
usually the result of excessive traffic on the Ethernet.
Commands
Losses:
3-25
3
0
0
0
0