Appendix A: Port Pin/Signal Allocations
A.3
SERIAL PORT
The following table provides pinout information for the Micro-CS serial
ports.
Table A-2 RJ45 Serial Port Pin/Signal Allocations
A.4
LAN NETWORK PORT
There are two ways to connect to the network with the Micro-CS:
Through an RJ45 connector to the MicroMMAC internal AUI, or through
an RJ45 mounted on the front panel.
A-2
Front view
Figure A-1 RJ45 Console Port Receptacle
RJ45 Pin
1
2
3
4
5
6
7
8
1
8
Signal
RTS
DTR
TXD
DCD
RXD
GND
DSR
CTS
Micro-CS Installation Guide