Table of Contents
Advertisement
Chapter 1: Introduction
1.5.6
System Status LEDs
The front panel LEDs provide information on system status and activity.
SETUP
(green)
ATTN
(amber)
STATUS
(green)
NET
(green)
INT
(green)
PORT
(green)
1-6
Table 1-1 : System LEDs
On when Setup button has been pressed within
3 seconds of Setup, indicating Port 1 is now a
console port.
Flashing when the unit is in Setup.
NOTE: Both the SETUP and ATTN LED's will be
on when the Micro-CS is in Monitor mode.
On when the Micro-CS requires operator
attention.
Flashing when the unit encounters a problem.
On when the unit is loading or dumping.
Flashing when the unit is trying to initiate a load.
Flashes to show network activity on the
Ethernet.
On when the AUI port to the MicroMMAC is
selected.
Off when the front panel 10BASE-T port is
selected.
Flashes with activity from the numbered port
(eight total, one per port including modem).
Micro-CS Installation Guide
Advertisement
Table of Contents
