ABB ACS2000 DFE User Manual page 37

CHAPTER 2 – POWER ELECTRONICS AND CABINET FEATURES
2.3.5 Terminal compartment
—
References
The terminal compartment is located behind the
—
swing frame of the control unit. The compartment
2-12 Terminal
compartment
provides the terminals for the feeder and motor
cables, and the ground bus for the termination of
the ground cable and the cable screens.
—
2-12
• For information on the type of cable
entry in the drive, see mechanical
drawings.
• For further information, see 6.8 Cable
entries.
37