ABB ACS2000 DFE User Manual page 141

CHAPTER 10 – PREVENTIVE AND CORRECTIVE MAINTENANCE
10.5.3 Serial communication interfaces
• AF 100 fieldbus - NAFA-01 installation and
start-up guide
• Modbus TCP - NETA-21 remote monitoring tool
user's manual
• Modbus RTU - NMBA-01 installation and start-
up guide
• Profibus - NPBA-12 installation and start-up
guide
AF 100 interface
—
References
—
—
10-5 AF 100 interface
Table 10-1 AF 100 LED description
LED
F (Fault)
R (Run)
P (Power OK)
T1 (Traffic 1)
T2 (Traffic 2)
—
10-5
To identify the serial communication
interface in the drive, see the applicable
wiring diagrams. For further information
on the device, select the appropriate
manual:
Meaning
Red Module fault. Also lights up during
module start-up. Turns off when
the self-test is successful
Green In operation
Green Internal power OK
Yellow Data traffic on AF 100 cable 1
Yellow Data traffic on AF 100 cable 2
1
2
3
4
5
1. Status LEDs
2. Service connector
3. AF 100 station address selectors
4. Power supply terminals
5. AF 100 terminals
141