ABB ACS2000 DFE User Manual page 125

CHAPTER 9 – CDP CONTROL PANEL
9.5.5 Displaying a fault and resetting the fault
memory
1. To open the actual signals mode, press the ACT
key.
1 L ->
StateINU
MOTOR SP
POWER
2. To change to the fault memory display, press a
fast navigation key.
1 L ->
1
+ PANEL LOST
0707730 12:30:02.3256
3. To display a specific fault, press the slow navi-
gation keys. The UP key selects the previous,
the DOWN key the next fault.
1 L ->
2
+ AMC: Fault Class 1
9 H 38 MIN 48 S
4. To clear the fault memory, press the RESET key.
1 L ->
1
5. To return to the actual signals display, press a
fast navigation key.
1 L ->
StateINU
MOTOR SP
POWER
9.5.6 Displaying and resetting an active fault
1. To display an active fault, press the ACT key.
600.0 rpm
ReadyOn
0.00 rpm
0.0 kW
2. To reset the fault, press the RESET key.
600.0 rpm
LAST FAULT
600.0 rpm
LAST FAULT
600.0 rpm
LAST FAULT
H MIN S
600.0 rpm
ReadyOn
0.00 rpm
0.0 kW
125
600.0 rpm
1 L ->
ACS2000
*** FAULT ***
MCB CloseControl
1 L -> 600.0 rpm
ReadyOn
StateINU
MOTOR SP 0.00 rpm
POWER 0.0 kW