ABB ACS2000 DFE User Manual page 81

CHAPTER 6 – ELECTRICAL INSTALLATION
—
6.7 Cables between integrated
transformer and drive
Cabling between drive and integrated transformer includes the
following connections:
• Transformer primary and secondary cables
—
References
• Temperature sensor cables
—
• Three-phase power supply cable and control
6-3 Drive with integrated
transformer
cable to each of the transformer fan units
• Air filter and pressure monitoring cable
• Heating cable (option)
The cables are identified by their specific number
and are labeled with the designation of the termi-
nal where they are connected to.
The terminals for the primary
ondary cables
of the transformer cabinet. The terminals are
accessible through cutouts in the terminal com-
partment of the drive. The power supply and con-
trol cables of the transformer's fan units are
routed through the cable lead-through
the side wall.
Front view
1
1. Input transformer
2. Drive
3. Control cable lead-through
4. Terminals for primary cables
—
6-3
(6-3: 4)
(6-3: 5) are located on the side wall
For further information, see the applica-
ble wiring diagrams.
2
5. Terminals for secondary cables
6. Grounding cable
7. Heating cable (optional)
and the sec-
(6-3: 3) on
3
Side view
4
5
6
7
81