ABB ACS2000 DFE User Manual page 63

CHAPTER 4 – TRANSPORTATION, STORAGE AND DISPOSAL
4.4.3 Using a forklift (only ACS2000 with 1 MVA
—
References
output power)
—
• Only transport the cabinet with the short side
4-2 Recommended
forklift position
facing the driving direction.
—
When transporting the drive cabinet, the rec-
4-3 Using one pallet truck
ommended position of the forklift is on the
right short side of the cabinet (4-2). This is the
cabinet side with the heaviest drive compo-
nents.
• Use forks with sufficient length to ensure stable
transportation and to prevent tipping.
When the forklift is positioned on the left
(4-2:
cabinet.
When the forklift is positioned on the right
(4-2:
indicated by the
Insert the fork fully into the cabinet's forklift
pockets.
1
—
4-2
1), the forks must be at least as long as the
2), the forks must be at least as long as
arrow.
2
4.4.4 Using hand pallet trucks
• Choose the load capacity and the fork length of
the pallet truck according to the following
table.
Transformer
Length (m) Weight (kg)
1.6
1.9
2.2
2.4
2.6
• Place the pallet truck on the left or on the right
of the cabinet.
• Insert the forks fully into the cabinet's forklift
pockets.
3
—
4-3
Drive
Length (m) Weight (kg)
1650 1.7 1500
3070 2.2 1800
4800 2.5 2100
5600 2.5 2240
6100 -
63
-