ABB ACS2000 DFE User Manual page 10

10 ACS2000 DFE UM 3BHS360367 ZAB E01 REV. K
—
Intended use of equipment
Those in charge of the drive must ensure that the
drive is only used as specified in the contractual
documents, operated under the conditions stipu-
lated in the technical specifications and on the rat-
ing plate of the drive, and serviced in the intervals
as specified by ABB.
Use of the drive outside the scope of the specifica-
tions is not permitted.
Quality certificates and applicable standards
The following certificates and conformity declara-
tions are available with ABB:
• ISO 9001 / ISO 14001 certificates stating that
ABB Group has implemented and maintains
a management system that fulfills the require-
ments of the normative standards
• EC conformity declaration
• List of the standards the drive complies with.
Intended equipment use also implies that only
spare parts recommended and approved by
ABB must be used.
Unauthorized modifications and constructional
changes of the drive are not permitted.