CHAPTER 9 – CDP CONTROL PANEL
—
9.4 Identification mode
The identification mode informs the user about the CDP control panel
version and the ID number of the drive.
The information appears on the display when:
•
the power supply is switched on, or
•
the CDP control panel is connected to the drive
and the auxiliary voltage has been switched on
already.
When the CDP control panel is initialized as
described before, the display changes as follows:
After 2-3 seconds, information on the drive
the application software in use (3), and the drive
identification
After another few seconds:
CDP312 PANEL V5.30
........
(4)
is displayed.
ACS2000 xxxx
<
Device Name >
LDAI5500
ID-NUMBER 1
0.0 rpm
1 L ->
InitSeq....
StateINU
MOTOR SP
0.00 rpm
POWER
0.0 kW
(1,
2),
1
2
3
4
121