ABB ACS2000 DFE User Manual page 127

CHAPTER 9 – CDP CONTROL PANEL
Control panel overview
600.0 rpm
1 L ->
2
77 SYSTEM CONFIG
3
01 INU IdentifySel
INU1 (MASTER)
4
5
7
6
1. Status line
2. Group number and name
3. Parameter number and name
4. Parameter value
5. Selection key for parameters mode
6. Fast navigation key for selecting a parameter
group (and a parameter value)
7. Slow navigation key for selecting a parameter
(and a parameter value)
8. Enter key for confirming the selection
9.6.2 Selecting and changing a parameter setting
1. To enter the parameters mode, press the PAR
key.
1 L ->
77 SYSTEM CONFIG
01 INU IdentifySel
INU1 (MASTER)
2. To select a different group, press the corre-
sponding fast navigation key.
1 L ->
75 OPTION MODULES
06 C3P1/AI820 Module
DISABLED
3. To select a parameter, press the corresponding
1
4. To enter the parameter setting function, press
8
5. To change the parameter value, press:
6. To confirm the setting and to return to the
7. To cancel the setting and keep the original
600.0 rpm
9.6.3 Enabling / unlocking a parameter lock
600.0 rpm
Unwanted parameter entry can be prevented by
activating the parameter lock function.
The corresponding parameters are 16.02 PARAME-
TER LOCK and 16.03 PASSCODE and belong to
parameter group 16 SYSTEM CTRL INPUTS.
slow navigation key.
1 L ->
75 OPTION MODULES
07 C3P1/AI820 Module
DISABLED
the ENTER key.
1 L ->
75 OPTION MODULES
07 C3P1/AI820 Module
[DISABLED]
- the slow navigation key for numbers and
text,
- the fast navigation key for numbers only.
1 L ->
75 OPTION MODULES
07 C3P1/AI820 Module
[DI810 24VDC]
actual signals mode, press the ENTER key.
1 L ->
75 OPTION MODULES
07 C3P1/AI820 Module
DI810 24VDC
selection, press any of the mode selection keys.
The selected keypad mode is entered.
1 L ->
75 OPTION MODULES
07 C3P1/AI820 Module
DISABLED
127
600.0 rpm
600.0 rpm
600.0 rpm
600.0 rpm
600.0 rpm