Precision 500D Tables, Tubes And Collimators; X-Ray Tube Specification - GE Precision 500D Operator's Manual

3-2Precision 500D Tables, Tubes and Collimators

3-2-1 X–Ray Tube Specification
TABLE 7-10
X–RAY TUBE COMPATIBILITIES FOR IDD/PRECISION 500D TABLE
X–RAY TUBE TARGET ANGLE
MX 100 FL
TABLE 7-11
LEAKAGE TECHNIQUE FACTORS
TABLE 7-12
MINIMUM INHERENT FILTRATION
TUBE UNIT
MX 100–FL 0.6–1.25 12.5°
46–155500G18 (Housing) 46–155318G33 (Insert)
COLLIMATORS
• RAD Overhead
AL01C
• Fluoro Undertable
AF01A
NOTE:
om 5184516-100 Rev. 5
The following X-Ray Tubes may be used with Intelligent Digital Device and Preci-
sion 500D Table (Compatible with fluoro collimator). Refer to Appendix A, Maxiray
100 Tube Units, for further information about these X–Ray Tubes.
FOCAL SPOT
12.5° 0.6 mm/1.25 mm
TUBE UNIT
MX 100–FL 0.6–1.25 12.5°
46–155500G18 (Housing) 46–155318G36 (Insert)
COMPONENT
Radiopacity of the top and sub-panel is less than 1 mm aluminum equivalent at
100 kVp
POWER SHIM TYPICAL APPLICATIONS
32/100 KW 2.1°
MINIMUM INHERENT FILTRATION
Equivalent to 1.1 mm aluminum at 150 kVp
1.9 mm AI / 70kV
1.5 mm AI / 70kV
DF TEMPORAL
LEAKAGE TECHNIC
FACTORS
kVp mA
150 5
7-34