Table of Contents
Advertisement
2-2 Bucky Assembly
2-3 Front Panel
2-4 Vertical Lock Handle
SECTION 3
APPLICATIONS OF SG80/120
SECTION 4
OPERATION
4-1Vertical Positioning
om 5184516-100 Rev. 5
Includes the bucky, that is mounted to the bucky support behind the front panel.
Includes a cassette tray, suitable for all standard cassette sizes.
In the bucky assembly are also located other parts, such as the grid (optional) and
the ion chamber, used for AEC exposures.
Includes a carbon fiber manufactured barrier of dimensions 562 x 510 x 3, with an
absorption of maximum 0.9 mm Al measured at 100 KVp.
The vertical lock handle enables to displace the bucky carriage holding the bucky
assembly along the column stand. The vertical lock handle is left-right field config-
urable.
The SG80/120 vertical Bucky stands are designed specifically to handle a full
range of applications, from emergency procedures to routine radiographic studies.
Their smooth vertical travel enables a wide range of examinations with the patient
standing or sitting.
The SG120 offers even greater versatility with a tilting panel, controlled with elec-
tromagnetic brakes, for angulation examinations.
The next accessories are available for use with the SG80 and SG120:
•
Patient Support Kit (Lateral Bar and Patient Grip) to provide user support dur-
ing exposures.
•
Manual Hanging Cassette Holder to allow table-top exposures on vertical
bucky stand.
•
SG80/120 vertical bucky stands comply with all standard medical regulations
(UL, 21CFR, CSA, NRTL/C, CE, IEC).
The SG80/120 remains locked in its vertical position when the equipment is
switched ON thanks to the electromagnetic vertical brakes.
Procedure:
1. Press the key on the vertical lock handle.
2.Check that the brakes are released and the bucky assembly can be displaced
smoothly along the vertical direction.
9-3
Advertisement
Table of Contents
