Table of Contents
Advertisement
3-3User Preferences
ILLUSTRATION 5-54
USER PREFERENCE SCREEN
3-3-1 Default Dose - Fl/Rec
3-3-2 Default Pediatric Grid
3-3-3 DSA Image Invert
om 5184516-100 Rev. 5
Below the Utilities tab and within the Preferences tab the screen below appears:
The user has the ability to set the default values for all the functions listed.
The values set at this screen are used within the Patient Select, Acquire and
View/Film screens.
The default dose can be set to either Pediatric or Adult - this setting is used each
time a digital record exam is started. The user can also change the dose during
the exam at either the IUI or at the IDD console.
The default grid position can be configured to be in or out when the Pediatric dose
is selected. The user can also change the grid position during the exam at the
IDD console.
DSA Image Invert can be set to W/B or B/W (White on Black, Black on White).
When performing DSA acquisition images will be acquired and displayed at the
default setting.
5-54
Advertisement
Table of Contents
