Structure Of This Guide - Enterasys Matrix E1 Series Installation Manual

Structure of This Guide

STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This preface provides preliminary information to help you use this guide, a brief summary of each
chapter, defines conventions used in this guide, and lists technology guides that may help you set up
and manage the 1G58x-09.
Chapter 1, Introduction, provides an overview of the 1G58x-09 and the optional Ethernet
expansion modules, and explains how to contact Enterasys Networks for technical support.
Chapter 2, Network Requirements, outlines the network requirements that must be met before
installing the 1G58x-09.
Chapter 3, Hardware Installation, provides instructions on how to install the 1G58x-09 on a table
top or into a standard 19-inch rack, install optional expansion modules, and connect segments to the
device and any installed option.
®
Chapter 4, Troubleshooting, describes the function of the LANVIEW LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A, Specifications, contains information on port operating specifications, connector
pinouts, environmental requirements, and physical properties for the 1G58x-09, Mini Gigabit
Interface Cards (Mini-GBICs), optional Ethernet expansion modules, Gigabit Interface Cards
(GBICs) and the media they support.
Appendix B, Optional Installations and Mode Switch Bank Settings, describes how to set the
Mode Switch and replace the DRAM SIMM.
xvi About This Guide