Optional Installations And Mode Switch Bank Settings; Required Tools; B.1 Required Tools - Enterasys Matrix E1 1G587-09 Installation Manual

ELECTRICAL HAZARD: Only qualified personnel should perform installation
procedures.
RIESGO ELÉCTRICO: Solamente personal calificado debe realizar procedimientos de
instalacion.
ELEKTRISCHER GEFAHRENHINWEIS: Installationen sollten nur durch ausgebildetes
und qualifiziertes Personal vorgenommen werden.
The top cover must be removed to gain access to the mode bank switches, and to install an optional
DRAM Single In-line Memory Modules (SIMMs).
This appendix provides information about the following:
•

Required tools

(Section
•
Removing the chassis cover
•
Locations, functions, and settings for the mode switches
•
Replacing SIMMs
B.1 REQUIRED TOOLS
Use the following tools to perform the procedures provided in this appendix:
•
Antistatic wrist strap
•
Phillips screwdriver
Mode Switch Bank Settings
B.1)
(Section B.2)
(Section B.4)

Optional Installations and Mode Switch Bank Settings

Optional Installations and
(Section B.3)
B
B-1