Remote Password - Mitsubishi MELSEC QS Series User Manual

8
PARAMETERS

8.3 Remote Password

This section shows the list of remote password-related parameters and explains the
details of each parameter setting item.
The remote password for the Ethernet module is set.
Item
Password settings
Model name
Password active
module settings
Start XY
Remote password detail settings
User connection No.
System connection
8
- 14 8.3 Remote Password
Diagram 8.12 Remote password setting screens
Table8.14 List of remote password setting items
Parameter No. Description
---- Enter the remote password.
Select the module model of the
----
remote password check target.
Set the start address of the
---- module targeted for the remote
password check.
Set the remote password details
----
in the QJ71E71.
---- Set the user connection number.
Specify the remote password
---- valid port of the system
connection.
Setting range
Within 4 characters (alphabets,
numerals, symbols)
QJ71E71
0000 to 03E0
H H
----
Connection 1 to 16
Specify the remote password
valid port.
• Auto open UDP port
• GX Developer transmission
port (TCP/IP)
• GX Developer transmission
port (UDP/IP), Dedicated
instruction, CC IE Control,
MELSECNET/10(H) relay
transmission port
Default value Reference
----
----
----
----
Refer to the
----
Ethernet
manual.
----