Communication With Cc-Link Ie Controller Network Module Or Melsecnet/H Module; Communication With Ethernet Module - Mitsubishi MELSEC QS Series User Manual

7
COMMUNICATION WITH INTELLIGENT FUNCTION
MODULE
7.2 Communication with CC-Link IE Controller Network Module or
MELSECNET/H Module
Communication between the CPU module and the CC-Link IE controller network module
or MELSECNET/H module is performed by link refresh.
To execute link refresh, the refresh parameters need to be set on the *** of Network
parameter in GX Developer.
For details on the network parameter setting items, refer to Section 8.2.
POINT
Remark

7.3 Communication with Ethernet Module

Communication between the CPU module and the Ethernet module is performed by
dedicated instructions. For details on the dedicated instructions, refer to Appendix 7.
POINT

7.2 Communication with CC-Link IE Controller Network Module or MELSECNET/H Module

When a CC-Link IE controller network module or MELSECNET/H module is used
with a safety CPU module, the functions that can be used are restricted.
For details on restrictions, refer to Appendix 4 and 5.
For details on the *** of Network parameter, refer to the following manuals.
CC-Link IE Controller Network Reference Manual
Q Corresponding MELSECNET/H Network System Reference Manual (PLC
to PLC Networks)
When an Ethernet module is used with a safety CPU module, the functions that
can be used are restricted.
For details on the restrictions, refer to Appendix 6.
1
2
3
4
5
6
7
8
7
- 2