APPENDICES
Appendix 5 Restrictions on Using MELSECNET/H Module with Safety
CPU Module
(1) Network parameters which can be set in the safety CPU module
TableApp.21 List of network parameters and their setting availability with GX Developer
Network type
Starting I/O No.
Network No.
Total number of (slave) stations
Group No.
Mode
Network range assignment (common parameters)
Station inherent parameters
Refresh parameters
Interrupt setting
Control station return setting
Standby station compatible module
Redundant setting
Inter-link data transfer
Routing parameters
Valid unit in access to another station
Remark
TableApp.21 lists the network parameters for MELSECNET/H and their setting
availability with GX Developer when the MELSECNET/H module is used with the
safety CPU module.
Item
MNET/H mode (control station), MNET/H EX (control station)
MNET/H mode (normal station), MNET/H EX (normal station)
MNET/10 mode (control station)
MNET/10 mode (normal station)
MNET/H standby station
For details on the MELSECNET/H, refer to the following manual.
Q Corresponding MELSECNET/H Network System Reference Manual (PLC
to PLC network)
Appendix 5 Restrictions on Using MELSECNET/H Module with Safety
Setting availability
: Available, : Not available
App
- 25
CPU Module
9
10
11