Table of Contents
Advertisement
6
FUNCTIONS
(4) Method with Remote RUN/STOP
Remote RUN/STOP operation can be performed either by the RUN contact or by GX
Developer.
(a) Method with RUN contact
(b) Method by GX Developer
The RUN contact is set at the PLC system tab screen in the (PLC) Parameter
dialog box of GX Developer.
The range of devices that can be set is input X0 to 17FF.
By turning the set RUN contact ON/OFF, the remote RUN/STOP can be
performed.
• When the RUN contact is OFF, the CPU module enters the RUN status.
• When the RUN contact is ON, the CPU module enters the STOP status.
Remote RUN contact
CPU module: RUN/STOP status
Diagram 6.24 Time Chart for RUN/STOP with RUN Contact
RUN/STOP of the CPU module can be executed by performing remote RUN/
STOP operation with GX Developer.
Operate GX Developer by choosing [Online]
Remote STOP
command
GX Developer
Remote RUN
command
RUN/STOP
status
Diagram 6.25 Remote RUN/STOP by GX Developer
Step 0
END
ON
OFF
STOP
RUN
STOP status
[Remote operation].
Step 0
END
ON
OFF
OFF
STOP
RUN
STOP status
6.12 Remote Operation
6.12.1 Remote RUN/STOP
Step 0
END
0
Step 0
END
0
ON
6
- 49
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
