Mitsubishi MELSEC QS Series User Manual page 70

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Write to program memory
5
- 6 5.1 Memories by CPU Module
5.1.2 Program memory
When writing data to program memory, display the writing to PLC screen with GX
Developer [Online] [Write to PLC].
Select "Program memory/Device memory" as the target memory on the Write to PLC
screen and write data to the PLC.
POINT
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Diagram 5.4 Write to PLC screen
Section 5.3.4)