Mitsubishi MELSEC QS Series User Manual page 235

APPENDICES
(2) CC-Link IE controller network functions which can be used in the safety
TableApp.20 List of CC-Link IE controller network functions and their availability in safety CPU module
Communication by LB/LW
Communication by LX/LY
Link refresh
Direct access to link devices
Cyclic transmission Assurance of cyclic data integrity
function
Cyclic transmission punctuality assurance
Constant link scan
Reserved station specification
Interlink data transfer function
Cyclic transmission stop/restart
Reading/writing data from/to word device on another station (READ/
SREAD/WRITE/SWRITE)
Transient request to another station (REQ)
Sending/receiving data (SEND/RECV)
Receiving data on another station (for interrupt program) (RECVS)
Reading/writing data from/to word device on another station (ZNRD/
Transient transmission ZNWR)
Remote RUN/STOP (RRUN/RSTOP)
function
Reading/writing clock data from/to the CPU module on another station
(RTMRD/RTMWR)
GX Developer access to other stations
Changing number of transient transmissions
Group function
Routing function
Time setting from GX Developer
Control station switching function
Loopback function (optical loop system)
Automatic return function
Cable fault detection function
RAS function
Cable insertion error detection function
Duplicated control station or station No. detection function
Transient transmission error detection time check
Transient transmission enabled even at CPU module error
CPU module
TableApp.20 lists the functions of CC-Link IE controller network and their availability in
the safety CPU module.
Function
Appendix 4 Restrictions on Using CC-Link IE Controller Network Module
Clock data read/write
Remote RUN/STOP
with Safety CPU Module
9
10
Availability
11
*1
*1
*1
*1
(To the next page)
App
- 23