Checklist After Installation - Reer MZERO Installation, Use And Maintenance Manual

CHECKLIST AFTER INSTALLATION

The MZERO unit is able to detect in real time the faults.
Anyway to have the system perfect operation perform the following checks at start up and at least
every one year:
Operate a complete system TEST (see "TESTING the system")
1.
Verify that all the cables are correctly inserted and the terminal blocks well
2.
screwed.
Verify that all the leds (indicators) light on correctly.
3.
Verify the positioning of all the sensors connected to MZERO.
4.
Verify the correct fixing of MZERO to the Omega rail.
5.
Verify that all the external indicators (lamps) work properly.
6.
➔
After installation, maintenance and after any eventual configuration change perform a
System TEST as described in the paragraph "TESTING the system".
8541403 • 19/07/2021 • Rev.1
STAND ALONE PROGRAMMABLE SAFETY CONTROLLER
OPERATION / CONTROL COMPLETE
❒
❒
❒
❒
❒
❒
13