'
1. While pushing the projection, pull the
blade until it becomes free.
2. Pull the blade off the frame along the slot.
Projection
3. Insert the cutout section of a new blade
into the large hole section of the frame.
Pull the blade along the slot into the
frame.
4. While pushing the projection, pull the
blade until it is locked.
Light bulb replacement
Use the bulb as specified.
(See Section 14.)
WARNING
To prevent injury;
•
Turn the engine off before replace
ment.
Keep children away from a bulb.
•
Allow the bulb to cool before
replacement.
CAUTION
Do not drop a bulb or scratch the surface.
After replacement, turn the light switch on to
see that the light will be illuminated.
If a bulb requires frequent replacement, have
the system checked by an authorized
Perodua Service Centre.
We recommend keeping a set of spare bulbs.
Bulbs are available at an authorized Perodua
Service Centre.