Engine coolant level check
Check the coolant level of the reserve tank
when the engine is cold.
Check if the level is between the "F (full)' and
"L (low)" lines.
If the coolant level becomes low due to natu
ral evaporation, add soft water only. If a
substantial amount of coolant is lost, add
long-life coolant.
If the reserve tank should become empty, fill
the radiator as well as the reserve tank with
coolant.
Wipe the spilt ·coolant away and install the
reserve tank and radiator caps securely.
Engine coolant change
It is necessary to change the coolant at
regular intervals.
For coolant capacity, see Section 14.
WARNING
Do not open the radiator cap or the
drain plug when the engine Is still hot.
Front
of vehicle
To change coolant
1. Remove the radiator cap.
2. Place a container under the drain plug
for draining coolant.
3. Remove the radiator drain plug and gas
ket, and allow the coolant to drain com
pletely.
4. Drain the coolant from the reserve tank.
5. Install the radiator drain plug and gas
ket.
6. Pour water into the radiator until it is full
and close the radiator cap.
7. Run the engine at idling speed for a while
and stop it.
8. Drain the water completely.