PERODUA VIVA L250 2007 Owner's Manual page 305

Remove any corrosion and objects
on the brake druny.md disk, and the
wheel hub nut surface with a waste
before putting on the spare tire.
Installation of wheels without se­
cure metal-to-metal contact at the
mounting surface may cause the
vehicle vibration and the wheel hub
nuts to loosen while driving.
10-11
6. Reinstall all wheel hub nuts and tighten
them until the wheel is no longer loose.
Make sure the taper portion of the hub
nuts are securely installed in the holes.
Do not yet tighten them firmly.
CAUTION
Do not oil the hub nuts. They may be
loosened while the vehicle is moving.
7. Insert the jack handle into the worm shaft
of the jack and turn it counterclockwise to
lower the vehicle.