PERODUA VIVA L250 2007 Owner's Manual page 306

CD.-©
X
@-®
8. Tighten the wheel hub nuts securely in
the diagonal order across the wheel.
Tightening torque: 88.2 - 117.6 N;m
(64.9 - 86.6 ft-lb, 9.0 - 12.0 kgf-m)
CAUTION
Do not tighten the hub nuts with other
tools or by foot.
It may damage the thread.
After driving 1,000 km (600 miles), check to
see that the wheel hub nuts are tight.
9. Install the wheel center cap or the wheel
cover, by lightly tapping, aligning the
cutout section with the air valve.
10. Check the air pressure of the replaced
tire and adjust it as specified.
Tighten the air valve cap.
CAUTION
The tire air pressure of the mounted spare
tire is kept higher than the specified one.
Make sure to adjust it after installation.
11. Store all tools, jack, jack handle, and flat
tire securely.
WARNING
If you notice any vibration or abnormal
noise after changing a wheel, have them
checked by an authorized Perodua
Service Centre Immediately.
10-12