Static System Messages - Cabletron Systems TRMIM 24A TRMIM-24A User Manual

TESTING AND TROUBLESHOOTING

4.3.1 Static System Messages

These messages display TRXI configuration information. To view the
Static System Messages, momentarily press the Display button
located below the LCD window. Press the Display button to scroll
through each message. If you do not press the Display button within
ten seconds, the display defaults back to the product name.
Displayed Message
IP Address
xxx.xxx.xxx.xxx
MAC Address
0000B8xxxxxx
RAM Image
Rev. xx.xx.xx
Boot PROM
Rev. xx.xx.xx
Flash Programmed
xx Times
COM 1
Baud Rate xxxxxx
COM 1
Function xxxxxx
COM 2
Baud Rate xxxxxx
COM 2
Function xxxxxx
Page 4-4
Comments
Displays the current IP
address. This may be changed
through Local Management.
Displays the Hardware
or MAC address.
Displays the revision number of the
Flash EEPROM.
Displays the revision number of the
internal Boot PROM.
Displays the number of times the
the Flash EEPROM has been
programmed
Displays the current baud rate
of the COM 1 port.
Displays the current function
(Console, Modem, UPS, or SLIP) of
the COM 1 port.
Displays the current
baud rate of the COM 2 port.
Display the current function
(-N/A-,Console, Modem, UPS, or
SLIP) of the COM 2 port.