Country-Specific Requirements - Cabletron Systems SmartSTACK ELS100-24TXM Installation And User Manual

Country-Specific Requirements

Table A-3 lists the power cord set requirements by country and identifies
the accredited agency within that country.
Table A-3. Power Cord Set Requirements by Country
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Italy
Japan
Netherlands
Norway
Sweden
Switzerland
United Kingdom
United States
* The note column includes a number. Associate this number with the corresponding
notes listed after the table to obtain specific power standards and requirements.
NOTE 1
Flexible cord must be <HAR> Type HO5VV-F or HO3VV-F, 3-conductor,
1.0 mm , or 0.75 mm
2
coupler and wall plug) must bear the certification mark of the agency
responsible for evaluation in the country where it will be used.
NOTE 2
Flexible cord must be Type SV, SJ, SPT or equivalent, No. 18 AWG, 3-
conductor. Wall plug must be a two-pole grounding type with a NEMA 5-
15P (15A, 125V) or NEMA 6-15P (15A 250V) configuration.
NOTE 3
Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law.
Flexible cord must be Type VCT or VCTF, 3-conductor, 0.75mm2
conductor size. Wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (15A, 125V) configuration.
9032785
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
FIMKO
UTE
VDE
IMQ
JIS
KEMA
NEMKO
SEMKO
SEV
BSI
UL
conductor size. Power cord set fittings (appliance
2
See Notes *
1
1
1
2
1
1
1
1
1
3
1
1
1
1
1
2
Technical Specifications 79