Table of Contents
Advertisement
Step 1: Open the lock of the corresponding HDD tier.
Step 2: Pull out the corresponding HDD tray.
Step 3: Remove the old HDD from the tray.
Step 4: Install a new HDD into the tray, and push the tray back into the chassis.
6.4 Redundant Hot-plug Power Supply Option
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
1.
Access the product rear panel.
2.
Remove the power supply blank.
28
Figure 6-9
Advertisement
Table of Contents
