Protocol And Ports - Inspur NF8480M5 User Manual

Note
N = No Access Privilege level of Unified User
U = User Privilege level of Unified User
O = Operator Privilege level of Unified User
A = Administrator Privilege level of Unified User
R = Root user - sysadmin of BMC OS
YES = Support
NO = Not Support

9.16 Protocol and Ports

BMC supports network connection manager library to configure networking services
configuration in run-time. RCMP+, HTTP/HTTPS, KVM, CD-MEDIA, FD-MEDIA, HD-MEDIA,
SSH, TELNET and SOLSSH services are supported so far. Users can enable or disable theses
services, configure communication port, session timeout value of the service and the
maximum number of allowed sessions for the services.
Table 33 Protocols and Ports
Service Usage
RMCP+ IPMI
HTTP/HTTPS Web GUI
Console
KVM
Redirection
cd-media Virtual Media Enable
fd-media Virtual Media Enable
hd-media Virtual Media Enable
Ssh ssh
telnet telnet
solssh sol by ssh
Note1: Http/Https (WEB) Timeout, if there is no web request in Timeout, web session will be
deleted, and new web request will not respond. If the web page has no auto update, it will
be logged out when you switch pages or refresh the page after timeout.
Note2: Telnet is a non-security protocol, if not used, we suggest you disable it.
Fixed protocols can not be configured.
118
Default Non-Security
State Port
Enable 623
Enable 80(Http)
Enable 7578
5120
5122
5123
Disable N/A
Disable 23
Enable 52123
Security Default
Port Portz
N/A N/A
443(Https) 443(Https) 1800
7582 7578
5124 5120
5126 5122
5127 5123
22 22
N/A 23
N/A N/A
Max
Timeout(s)
Session
1800 20
20
1800 4
N/A 4
N/A 4
N/A 4
600 N/A
600 N/A
60 N/A