Restore Factory Default - Inspur NF8480M5 User Manual

BMC Settings
Figure 54 BIOS Update Step 2
9.23.3 CPLD FW update
BMC uses JTAG to update CPLD. Support Web GUI update.

9.24 Restore Factory Default

BMC supports to restore factory default in Web GUI. Go to page "Administration->Restore
Factory Defaults" to check and configure.
Figure 55 Restore Factory Default
Note: Update policy "Overwrite" means selected items will be overwritten to defaults after
clicking "Restore Factory Default" or upgrading BMC; "Preserve" means selected items will
be restored after clicking "Restore Factory Default" or upgrading BMC.
Table 38 Restore Factory Default
135