Mounting The 7C04 Chassis - Cabletron Systems 7C04 Workgroup SmartSWITCH User Manual

Installation

2.2.2 Mounting the 7C04 Chassis

To mount the 7C04 Chassis in a standard 19-inch equipment rack,
(Figure 2-2) use the following steps:
1. Slide the chassis into the equipment rack.
2. Align the holes on the chassis' mounting brackets with the
holes on the equipment rack.
3. Insert screws (provided with the equipment rack) into the
desired holes of the mounting brackets.
4. Use a screwdriver to tighten each screw until the chassis is
secured to the equipment rack.
Mounting Bracket
Figure 2-2. A 7C04 Chassis mounted in an equipment rack
2-4
Equipment Rack
Power Supply Module
1
POWER IN
2
POWER OUT
SN
OVERLOAD
FANS
3
4
Mounting Bracket