Cleaning And Maintenance; Troubleshooting; Specifications - Gabarron Diligens DIL4GC Installation Instructions And User Manual

Wifi thermal radiator
Hide thumbs Also See for Diligens DIL4GC:
Table of Contents

Advertisement

Available languages

Available languages

EN

5.- CLEANING AND MAINTENANCE

The radiators do not precise any special maintenance providing thermal comfort during large periods. Clean dust with a dry,
soft cloth only when the unit is disconnected and cold.
Do not use solvents or abrasive products for cleaning.
After the heating season disconnect the radiator with the switch located on the back surface of the radiator.
This thermal radiator has been manufactured under an assured quality system using environment friendly processes.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their materials in the right way.

6.- TROUBLESHOOTING

The radiator does not heat.
The room does not reach the required
temperature.
"OC", "SC" message is displayed.
"Err1", "Err2", "Err3", "Err4" message
is displayed
Time settings are lost.
The keyboard does not respond.
The radiator does not communicate with
the G Control Hub.

6.- SPECIFICATIONS

Models
Elements
Length (cm)
Width (cm)
Height (cm)
Weight (kg)
Voltage
Isolation
Power (W)
All models are equipped with control trough G-Control Hub connected to the network.
Check the heater or the air inlets are not covered.
Check the selected temperature is in accordance with the desired
temperature. Maybe the room needs more heating power.
Sensor wrong connection. Contact the after sale service.
Contact the after sale service.
There was electric supply shortage or the unit has been disconnected by the
main switch.
If the Lock message is displayed, the thermal radiator keyboard is locked.
Hold "+" and "-" keys simultaneously for 3 seconds to unlock the keyboard.
Check the unit is associated, the symbol
display LCD.
For distances greater than 30 metros and 2-3 walls, associate first the closest
unit because of each unit can work as repeater.
If
symbol is blinking, check the G Control Hub connexion to the
network, and if any other device in the RF Net that could be working as
repeater has been removed.
DIL4GC
DIL6GC
4
6
43.5
59.5
8
11
500
750
DIL8GC
DIL10GC
8
10
75.5
91.5
10 cm plus 2 cm clearance
58
14
17
220 – 240 V~
Class I
1000
1250
18
must be shown on the
DIL12GC
DIL14GC
12
14
107.5
122
20
23
1500
2000

Advertisement

Table of Contents
loading

Table of Contents