Cleaning Maintenance Instructions; Main Components List - Gabarron ECOHHR20 Advanced Installation Instructions

5.- CLEANING MAINTENANCE INSTRUCTIONS

Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the heating element of the heater
is cool.
Occasionally, clean dust with a dry, soft cloth. Do not use any solvent or abrasive product for cleaning.
When the heating season is finished, please disconnect the device by turning off the power switch located at the right back of the
unit or at the circuit breaker.
Any other servicing should be performed by an authorized technician.
i
HHR has been manufactured under a fully assured quality system and using environmentally friendly processes. Once its
useful life is finished please take the device to a recycling depot so that its components can be recycled in an appropriate
way.

6.- MAIN COMPONENTS LIST

Storage Heating Element
275W Balancing Element (EcoHHR20)
410W Balancing Element (EcoHHR30)
550W Balancing Element (EcoHHR40)
85ºC Left Limiter
140ºC Right Limiter
140ºC Storage Limiter
160ºC Cut Out Manually Limiter
Switch
Ref. 10190410
Ref. 15192000
Ref. 15192002
Ref. 15192004
Ref. 30100040
Ref. 15190720
Ref. 15190720
Ref. 15190730
Ref. 46100530
12
Main PCB
Keyboard PCB
Core Sensor
Air Sensor
Room Sensor
Fan
900 Ω Fan Resistor (EcoHHR40)
1050 Ω Fan Resistor (EcoHHR30)
1200 Ω Fan Resistor (EcoHHR20)
Ref. 15192125
Ref. 15190060
Ref. 15192140
Ref. 15192145
Ref. 60100580
Ref. 20191056
Ref. 15192164
Ref. 15192162
Ref. 15192160